XR60CX Freezer temperature controller

This model is a micro temperature controller suitable for medium/low temperature refrigeration system, with 3 control outputs; One compressor, one defrosting (electric heat or hot gas), and one evaporator fan have two conventional NTC or PTC probe inputs (at the same time, the third and fourth probe inputs can be added through parameter selection), and one passive digital switch input (which can be used as the third probe input) that can be set. Optional remote display (connector, model: NG6-K), which can be used as the fourth sensor input to measure the condenser temperature alarm or display the temperature value of a point. The temperature controller can also be connected to the network compatible with ModBUS-RTU protocol by installing XJ485-CX communication conversion module, such as DIXELL's XWEB series monitoring system. The parameters can be quickly copied by setting or programming the key (HOT KEY) through the panel keyboard.
Technical parameters:
Shell: ABS matt flame retardant plastic
Overall dimensions: front 32 × 74mm； Depth: 60mm;
Installation dimension: 71 for fixing in the opening × 29 mm panel;
Overall protection grade: IP20; Protection grade of front panel: IP65;
Terminal block: bolt crimping, wire diameter ≤ 2.5mm2
Power supply: 12Vac/dc, ± 10% according to the model; 24Vac/dc，±10%；
230Vac±10%、50/60Hz； 110Vac±10%、50/60Hz
Executive standard: refer to the nameplate on the object
Power consumption: maximum 3VA
Display: 3-digit red digital tube, 14.2mm high;
Input: Up to 4 NTC or PTC inputs
Digital input: passive switching value
Output relay: compressor SPST 8 (3) A/250Vac; SPST 20(8)A/250Vac； Defrosting: SPDT 8 (3) A/250Vac; Evaporator fan: SPDT 8 (3) A/250Vac or SPST 5 (2) A/250Vac
Data storage: EEPROM
Control level: 1B; Environmental protection grade: 2; Software level: A;
Maximum insulation voltage: 2500V; Overvoltage level: II
Operating temperature: 0~60 ℃ Storage temperature: - 30~85 ℃ Relative humidity: 20~85RH% (no condensation)
Measuring and control temperature range: NTC-40~110 ℃ (- 40~230 ℉) PTC-50 ℃ (- 58~302 ℉)
Resolution: 0.1 ℃ or 1 ℃ Accuracy: ± 0.7 ℃ ± 1 bit at ambient temperature of 25 ℃
Power supply: 230V